Aerzen VMY-screw
compressors with oil injection and integrated volume control have been designed
for intake volume flows from 500 m³/h up to 8900 m³/h and for an
overpressure – single stage - up to 20 bar (higher pressures on request).
In vacuum operation, intake
pressures up to 1
mbar abs. can be reached in a single stage. The VMY-screw compressor units
are designed to suit the requirements of a wide range of applications for the
process gas industry. Depending on requirements and expenditure oil carryover
down to < 1 ppm can be achieved, the standard package is designed for
oil carryover down to < 5 ppm.
The unit design can be effected acc. to
the following guidelines:
DIN / EURO standards
NACE
AD-regulations
TEMA - standard
ASME VIII Div. 1, incl. U-stamp
API-guidelines
Intake volume flow:
from approx. 500 up to 8900
m³/h
Sizes:
12 sizes
Suitable for:
compression of oil-compatible process gases,
e.g. natural gas, hydrocarbon combinations, helium
Pressure operation:
overpressure single-stage max. pe = 20 bar;
negative pressure up to 1 mbar abs.
